Hikvision DS-3E0109P-E/M 9-Port PoE Switch 8×PoE 100Mbps Long Range 300m

The Hikvision DS-3E0109P-E/M 9-Port PoE Switch, 300m Extend Mode is an unmanaged Fast Ethernet switch built for CCTV runs where cameras sit further from the recorder than standard PoE allows.

What the ports give you

• 8 × 10/100 Mbps PoE ports — enough for eight IP cameras or PoE access points, each wired direct with no separate power injector.
• 1 × 10/100 Mbps uplink port — feeds the switch back to your NVR or network, making nine ports in total.
• 802.3af and 802.3at support — covers both standard PoE (af) and higher-draw PoE+ (at) devices on the same switch, up to 30 W per port.

Long cable runs

Switch on Extend mode and PoE will reach up to 300 m, well beyond the 100 m limit of ordinary Ethernet. Useful for perimeter cameras, warehouse spans or outbuildings where running a fresh power feed isn't practical.

Switching performance

The switch has a switching capacity of approximately 1.8 Gbps, using store-and-forward switching architecture, which supports stable handling of surveillance traffic across all ports.

Build and protection

The enclosure is metal and fan-free, so it runs silently on a desk or wall bracket. 6 kV surge protection adds a layer of resilience against voltage spikes on exposed cable runs. Intelligent PoE management tracks total power draw across all eight ports and adjusts distribution as the switch approaches its limit.

Plan your NVR channel count and total PoE load before wiring in eight cameras — this switch handles the ports, but power budgeting is still down to your device selection.