Product Description
The 4 Port Gigabit POE Extender 1000M Network Switch Repeater IEEE802.3af/at Plug&Play for PoE Switch NVR IP Camera AP (GoodTop, SKU PoE-Extender-Repeater-4-Port-Gigabit-1000M, also listed as POE013GS) takes a Power over Ethernet (PoE) connection and passes power and data on for a further 100m (328ft).
What the specs mean on site
- 1 input, 3 outputs: one cable in from the PoE source, up to three devices out.
- IEEE 802.3af/at: the PoE standards covered by its ports.
- 30W maximum input, 25W total output: the three outputs share 25W. Each port supplies up to 15.4W, so three devices at full draw will not all fit. Add up their load first.
- 10/100/1000 Mbps auto-adaptation: each port matches the speed of the device plugged into it, up to Gigabit.
- VLAN isolation on output ports 1-3: a VLAN (virtual local area network) keeps traffic on those ports separate, which supports network security.
- 3-level cascade: you can chain extenders three levels deep, which cuts the number of long cable runs back to the source.
What you need alongside it
The extender has no power supply of its own. Connect it to a PoE device first, such as a PoE switch or an NVR (network video recorder) with PoE ports. Use Cat5e cable at minimum. Cat6 is recommended for steadier data and power.
Setup is plug and play, with no configuration. The unit is wall mountable.
Specifications
- Brand
- GoodTop
- Product Type
- Gigabit PoE extender
- Total Ports
- 4 × RJ45
- Input
- 1 × PoE input port
- Outputs
- 3 × PoE output ports
- Network Speeds
- Auto-adaptive 10/100/1000 Mbps
Technical Specifications
Frequently Asked Questions
Is a separate power adapter needed for this PoE extender?
No. It has no power supply of its own, so it must be connected to a PoE device first.
How much power can the three outputs supply?
Total output is 25W, with up to 15.4W on any one port. Maximum input is 30W.
Which network cable should I use?
Use Cat5e at minimum. For dependable data transfer and steady power delivery, Cat6 is the preferred choice.
Can I chain more than one extender?
Yes. It supports 3-level cascade, which can reduce wiring difficulty on remote runs.
You May Also Like
View All
Further reading
- Best PoE Switch for CCTV UK 2026The best PoE switch for CCTV is the one whose total PoE budget covers your cameras' maximum draw rather than their typical draw, with headroom to spare, and…
- Best NVR Recorder UK 2026: Size, Storage and PoE GuideThe best NVR recorder is the one whose channel count, total bitrate ceiling and drive bays cover your cameras and your retention period with room to spare, so…
- Best NVR CCTV Systems 2026: PoE vs WiFiThe best NVR for a commercial CCTV install is the one whose PoE power budget, incoming bandwidth and channel count are matched to your actual camera load — not…
Reviews
Reviews for 4 Port Gigabit POE Extender 1000M Network Switch Repeater IEEE802.3af/at Plug&Play for PoE Switch NVR IP Camera AP: none yet. Who can review: customers who bought this item. When we ask: after the order is dispatched. Every rating shown is therefore from a verified purchase.