Product Description
This is a 10m CAT6 patch cable with RJ45 male connectors factory-terminated at both ends, wired to T568B. It goes straight into a rack, patch panel, NVR (network video recorder) or camera drop without crimping.
Key specs
- 24AWG stranded copper UTP (unshielded twisted pair) construction — supports 1000Base-T Gigabit Ethernet
- 100m channel length rating — a 10m run has plenty of headroom for voltage and signal loss
- 250MHz bandwidth — exceeds CAT5e, and stays backward compatible with 100Mbps Fast Ethernet gear
- Black PVC jacket — flexible enough for tight rack and containment routing
- Gold-plated RJ45 contacts with snagless boots — protects the clip from snagging and breaking during repeated install/removal
Where it fits
Use it to link a PoE (Power over Ethernet) switch to a patch panel or camera drop, connect an NVR to an operator PC or monitor in a control room, or run a router/switch to a workstation on a general office LAN alongside a CCTV install. The T568B wiring gives a standard straight-through connection — no crossover needed between routers, PCs, PS4 consoles, NVRs or PoE switches.
Backward compatibility with CAT5e means it drops into a mixed Gigabit/Fast Ethernet setup without forcing an upgrade elsewhere on the network.
Specifications
- Product Type
- CAT6 RJ45 Patch Cable
- Connectors
- RJ45 Male to RJ45 Male
- Wiring Scheme
- T568B Straight-Through
- Category
- CAT6 UTP
- Shielding
- Unshielded (UTP)
- Conductor Gauge
- 24 AWG Stranded
- Conductor Material
- Pure Copper
- Bandwidth
- 250 MHz
- Max Speed
- 1Gbps (1000Base-T)
- Jacket Material
- PVC
Technical Specifications
Frequently Asked Questions
Does this cable support Gigabit Ethernet?
Yes. The 24AWG stranded copper UTP construction supports 1000Base-T Gigabit Ethernet, with a 250MHz bandwidth rating that exceeds CAT5e.
Will it work with older Fast Ethernet equipment?
Yes, it's backward compatible with 100Mbps Fast Ethernet networks alongside Gigabit gear.
Is any crimping or assembly needed?
No. It's a pre-assembled patch cord with RJ45 male connectors factory-terminated at both ends, wired to T568B.
What is this cable typically used for in a CCTV setup?
It suits PoE switch to patch panel or camera drop connections, NVR to operator PC links, or router/switch to workstation runs.
You May Also Like
View All
Further reading
- CAT5e vs CAT6 Cables: Speed, Distance & CCTV ComparisonFor many IP camera runs, Cat5e is enough: it is rated for up to 1 Gbps over 100 m, and the camera, switch and NVR set the link speed, not the marking on the…
- CAT6 vs CAT6A for CCTV: Speed & Distance 2026CAT6 is the cheaper, thinner cable and holds its full Gigabit speed across the whole 100m channel; it's only on 10GBASE-T (10 Gigabit) links that it falls back…
Reviews
Reviews for CAT6 RJ45 Patch Cable 10m Black PVC UTP Snagless Gigabit Ethernet CCTV Lead: none yet. Who can review: customers who bought this item. When we ask: after the order is dispatched. Every rating shown is therefore from a verified purchase.