Hikvision DS-K5604-Z(H) Face Recognition Access Control Terminal 7-Inch

The Hikvision DS-K5604-Z(H) Face Recognition Access Control Terminal 7-Inch lets people through a door by face, with a built-in card reader as a second method. It uses deep learning recognition with anti-spoofing, and recognition typically takes under 0.2 seconds.

What the specs mean in use

• 50,000 face templates and 100,000 card credentials. A template is the stored face record for one person. This capacity suits medium to large sites.
• 0.3 m to 3 m recognition distance. Users can be read from close up to a few steps back, which gives some tolerance on mounting position.
• 7-inch colour LCD touchscreen. Enrolment, authentication and system management are handled on the unit itself.
• 13.56 MHz Mifare reader. Contactless cards can be used alongside face recognition, so a site can offer more than one verification method.

Connections

• TCP/IP (the standard network protocol) links the terminal to Hikvision access control platforms for central management, monitoring and event recording.
• Wiegand (a common signal format between readers and controllers) lets it work with third-party access control controllers.
• Door relay output, alarm input/output, exit button connection and door contact input cover the usual door-side wiring.

What else you need

A network cable run to the terminal, the lock hardware wired to the relay output, and a Hikvision platform if you want centralised control. Designed for office buildings, corporate facilities, industrial sites and secured access areas, including time attendance use.