SPL-8 Lever Wire Connector 8 Port Terminal Block for CCTV Power

The SPL-8 Lever Wire Connector 8 Port Terminal Block for CCTV Power (SKU SPL-8-8-GREY) gives you one tidy place to join low-voltage conductors. You do not need a crimping tool or a screwdriver.

What each spec means on the job

• 8 ports, each independent: room for eight conductors at one junction point, so a feed from a centralised power supply unit can be shared across several camera runs.
• 12V DC and 24V DC: suits low-voltage CCTV distribution at either voltage. It also fits LED driver and control panel wiring.
• Tool-free lever clamp: conductors go in and come out by hand. Adding or removing a camera later is a quick change. The clamp gives a vibration-resistant electrical contact.
• Solid and stranded copper: covers CCTV power cable, alarm cable and low-voltage control wiring.
• Compact, insulated housing: sits inside camera junction boxes, wall cabinets and network enclosures. The insulation protects you while you terminate.

What else you need

The connector joins conductors. It does not supply power. You still need a 12V DC or 24V DC power supply that matches your cameras, copper cable for each run, and an enclosure to hold the block.

Installers, structured cabling technicians and electrical contractors use it for surveillance and network infrastructure work.