SPL-4 Dual Channel Lever Wire Connector 4 Port Terminal Block CCTV

The SPL-4 is a 4-port lever connector for CCTV power wiring, split into two channels: one for positive, one for negative.

What each spec means for you

• 4 ports, dual channel — separate positive and negative rows, so you land four power runs without mixing polarity.
• Colour-coded levers — each lever marks its polarity, cutting the chance of a reversed connection when several cables are terminated at once.
• 12V DC and 24V DC rated — covers the two common CCTV camera power voltages, so check your camera or power supply label matches before wiring in.
• Lever clamp termination — conductors clip in and lock under a lever, no screwdriver or crimp tool needed.
• Transparent housing — you can see the copper seated correctly before closing up the enclosure.

Where it's used

Fits inside CCTV power supply units, junction boxes, and camera enclosures where several devices share one feed. It accepts solid and stranded copper conductors, matching typical CCTV power and alarm cable.

Before you buy

This is a connector, not a power supply — you still need a 12V DC or 24V DC source sized for your cameras' combined current draw. Check that source separately.