SPL-3-9-3 Grey Lever Wire Connector 3 In 9 Out Splicing Terminal

The SPL-3-9-3 Grey Lever Wire Connector 3 In 9 Out Splicing Terminal joins wires without screws. It has 3 input terminals and 9 output terminals, so one connection point can feed several conductors.

What the specs mean on site

• 3 in, 9 out: three incoming conductors are spread across nine outgoing ones from a single block. That is 12 terminals in one body.
• Lever-lock terminals: lift the lever, insert the stripped conductor, press the lever down. No screwdriver is needed.
• Reusable: the lever releases the wire again, so a connection can be changed later if the wiring changes.
• Solid, stranded and flexible conductors: mixed cable types can go into the same connector.
• Flame-retardant housing, copper internal contacts: the insulating body surrounds the metal that carries the connection.

Fitting notes

The connector is compact. It is intended for junction boxes, lighting fixtures, electrical enclosures and control panels. Typical uses are lighting circuits, control wiring, building wiring and low-voltage distribution.

You will need a way to strip each conductor before it goes in. Plan the layout so the three inputs and nine outputs match the circuits you are splitting.