SPL-2-6 Lever Wire Connector 2 In 6 Out Compact Splicing Terminal

The Compact Splicing Terminal Connector, 2 In 6 Out Lever (SKU SPL-2-6-2-GREY, model SPL-2-6) joins two incoming conductors to six outgoing ones in one housing. Here is what each spec means when you are holding it.

Spec by spec

• 2 input and 6 output terminals: one supply point can be shared across six conductors. One body does the job of several smaller joints.
• Lever clamp: lift the lever, insert the stripped conductor, press the lever down. No screwdriver, crimping tool or soldering iron is involved.
• Solid, stranded and flexible conductors: different cable types can be connected with the same connector.
• Reusable: the levers can be lifted again, so a circuit can be modified later without starting from scratch.
• Flame-retardant insulated housing, metal contacts: the plastic body insulates, and the metal contacts inside carry the connection.
• Compact size: made to fit inside junction boxes, lighting fittings and electrical enclosures.

What else you need

The lever replaces the terminal tool, not the stripping step, so you still need to strip each conductor before it goes in. Check that the box or fitting has room for the connector and the cables around it. Choose cable that suits the circuit you are wiring.

It is used for lighting circuits, electrical distribution wiring, control panels and building installations, wherever power or signal wiring needs to be distributed from a single supply point.